Vise Supergrip Polyurethane Glue - Instructions For Use
Step 1
Surfaces to be glued must be clean and free of contaminants. Vise Supergrip Polyurethane Glue is best when both
surfaces can absorb glue, but at least one surface must be porous.
Step 2
When gluing timber joints, it is wise to dampen the surface to be glued a few minutes before applying glue. You can use an
atomiser spray or a sponge. This accelerates the curing.
Step 3
Apply the glue to one surface only spreading it so that it completely coats the surface. Apply liberally, even though the glue
will ooze out of the joints.
